Honger forming machine line
Roll forming system consists of frame, transmission and roll forming and other components.
a) spindle diameter φ57, material is 40Cr steel, quenched and tempered. Under the main drive shaft sprocket chain drive.
b) transmission in part by the 5.5KW motor drive, drive sprocket chain drive way.
c) rolls made of 45 # steel, high-frequency processing, the hardness of HRC58-62, high hardness, wear resistance, hard chrome plated.
d) the body H beam welding, beautiful, generous, aging and stress relieved.
Below parameter and photos are working for our Europe Client, it will be completed soon.
一、technical parameters
No.
|
ITEM
|
PARAMETER
|
REMARK
| |
1
|
MATERIAL
|
Type
|
color plates, galvanized sheet etc.
| |
T.(mm)
|
0.8mm
| |||
Yield Strength (Mpa)
|
Q235
| |||
2
|
Forming speed (m/min)
|
≥8
|
Including hole
| |
3
|
Forming main power (KW)
|
5.5KW
|
FYR
| |
4
|
Hydraulic power (KW)
|
5.５KW
|
FYR
| |
5
|
Total Power
|
11KW
|
FYR
| |
6
|
Voltage
|
AC380V，50Hz，3P
| ||
7
|
Size(L×W×H m)
|
4×0.6×1.2 m
|
FYR
| |
没有评论:
发表评论